It have been quite some time since I last blog due to my moonlighting in a biomass power plant on top of the normal business of setting up pellet plant . After the power plant stint , much needed experience were gained and would be useful for future opportunities that would arise .
Currently we are setting up a new pellet plant with capacity of 4 ton per hour with initial target production of 1,200 ton per month . Production will increase to 2,000 ton per month within 6 month of commissioning . As we have space and electricity supply ( main factor to go big ) and possibly sufficient raw material , it is hope that capacity can be increase to 5,000 ton per month in a few years ( finger crossed  ) .
The new plant with much design and engineering upgrade as compared to the old plant would cut down workers to bare minimum of 4 worker per shift for the whole line , thus pushing operation to 3 shifts would be easily achievable .
Some upgrades as below :
1 ) All conveyor are connected , no human intervention , reduce fine dust dusty environment 
2 ) Use of inverter for motors to control speed when changes happens
3 ) All storage area for raw material are calculated and engineered to ensure non stop operation even though there is prolong holiday or shortage of raw material , up time per annum can be push beyond 300 days . We do not just take off the shelf design for this plant after our first plant many many problems .
4 ) many more upgrades
Lastly , any taker for our pellet please contact us at

Thank you for your time .