Pellet Mill

Pellet Mill are the " HEART " for Wood Pellet Production , Very Important . All other equipment are Ancillaries .

Pellet Mill Equipment from China are still at a very infant stage as compared to American or European Pellet Mill , but pricing wise , it is only 1 / 5 the price .

Unless you are going for very high output and have the investment capacity to invest for very long term , China Machines are of better choice .

And even so , you have so many Suppliers , Hundreds maybe , some are Merc , some Toyotas and some Protons , you could guess what I mean , pricing starts from USD20,000 to USD50,000 / unit for a Pellet Mill and Whole Line Plant can range from USD200,000 to USD650,000 for a 2 TPH Line . We have scour many part of China for the right machines .

The lower range will get you to do more maintenance and lower production and the higher range might not be feasible for Malaysia Environment . So , choose wisely .
Due to it's infancy , choosing the right Pellet Mill are important as it have the following problems that need to be address :


1 ) Die Chamber too Hot thus Die will break under stress ( Die cost RM6,000 / unit )

2 ) 24 hours operation not possible

3 ) Standard Die size of 420mm Diameter ( the normal Model SZLH420 MZLH420 ) definitely cannot produce more than 2 TPH per machine , if all conditions are right maybe you would get 1.5 TPH , this is where the learning curve start , how soon can you achieve optimum production , simple calculation , shortage of 0.5 TPH X 2 machine X 16 hour / day X 26 day / month X 3 months X RM100 / ton = RM124,800 in Sales Value , so imagine the savings if it is longer than 3 months . ( Some Manufacturer are claiming above 2 TPH , even 3 TPH )
The Pellet Mill we chose have somehow resolve partially some of the above problems with the right combination of ancillaries equipment . In our opinion it is of reasonable pricing and technically capable to handle over 2 TPH wood pellet production with minimum staffing .
You are invited to visit us once production starts .
The problem above may need another 5 years to solved as the supplier of this machines learn from mistakes and improved on it .
Our target is to invest in reasonably priced machine , high efficiency and low maintenance , so that we can recoup our investment in shortest time possible and have a decent profit to show .